swarm

Swarm Skill

Spawn isolated agents to execute tasks in parallel. Fresh context per agent (Ralph Wiggum pattern).

Loop position

Move 5 (wave execution) of the operating loop, specifically the parallel-fork primitive /crank invokes. Refuses to spawn parallel agents on a wave that has not cleared the wave-validity check in the slice validation plan: write scopes must be disjoint, no shared migration/contract/CLI surface, integration order declared when it matters, one owner per slice, discard path per slice. Parallelism is explicit ownership, not swarm chaos. Default to sequential when the wave-validity rows are not all green.

Coupled-chain rule (DERIVED-surface collision). Two slices that both regenerate a shared derived surface — cli-command-surface, registry.json, context-map, or the codex manifest — collide even if their source files are disjoint. Such a coupled chain (schema→write-model→export→gate→tests) MUST run sequential: each link branches off the freshly-MERGED prior link's SHA, never a pre-fan snapshot. Reserve parallel waves for provably-disjoint surfaces, cap 4–6.

Integration modes:

• Direct - Create TaskList tasks, invoke /swarm
• Via Crank - /crank creates tasks from beads, invokes /swarm for each wave

Requires multi-agent runtime. Swarm needs a runtime that can spawn parallel subagents. If unavailable, work must be done sequentially in the current session.

Architecture (Mayor-First)

Mayor (this session)
    |
    +-> Plan: TaskCreate with dependencies
    |
    +-> Identify wave: tasks with no blockers
    |
    +-> Select spawn backend (gc if available; runtime-native: Claude teams in Claude runtime, Codex sub-agents in Codex runtime; fallback tasks if unavailable)
    |
    +-> Assign: TaskUpdate(taskId, owner="worker-<id>", status="in_progress")
    |
    +-> Spawn workers via selected backend
    |       Workers receive pre-assigned task, execute atomically
    |
    +-> Wait for completion (wait() | SendMessage | TaskOutput)
    |
    +-> Validate: Review changes when complete
    |
    +-> Cleanup backend resources (close_agent | TeamDelete | none)
    |
    +-> Repeat: New team + new plan if more work needed

Execution

Read references/execution-steps.md when you need the full procedural detail (Steps 0–6): backend detection, gc dispatch, task typing + file manifests, context briefing, manifest auto-population, advisory bead clustering, wave identification, pre-spawn conflict check, test-file naming validation, multi-wave base-SHA refresh, and worker dispatch.

Every TaskCreate must include metadata.issue_type plus a metadata.files array. Do not spawn workers with overlapping file manifests into the same shared-worktree wave.

Example Flow

Mayor: "Let's build a user auth system"

1. /plan -> Creates tasks:
   #1 [pending] Create User model
   #2 [pending] Add password hashing (blockedBy: #1)
   #3 [pending] Create login endpoint (blockedBy: #1)
   #4 [pending] Add JWT tokens (blockedBy: #3)
   #5 [pending] Write tests (blockedBy: #2, #3, #4)

2. /swarm -> Spawns agent for #1 (only unblocked task)

3. Agent #1 completes -> #1 now completed
   -> #2 and #3 become unblocked

4. /swarm -> Spawns agents for #2 and #3 in parallel

5. Continue until #5 completes

6. /validate -> Validate everything

Scope-Escape Protocol

When a worker discovers work outside their assigned scope, they MUST NOT modify files outside their file manifest. Instead, append to .agents/swarm/scope-escapes.jsonl:

{"worker": "<worker-id>", "finding": "<description>", "suggested_files": ["path/to/file"], "timestamp": "<ISO8601>"}

For richer scope-escape narration (status classification, concrete next step, evidence), see references/scope-escape-template.md. Use the template when a single-line JSONL entry is insufficient for the operator to act on.

The lead reviews scope escapes after each wave and creates follow-up tasks as needed.

Key Points

• Runtime-native local mode - Auto-selects the native backend for the current runtime (gc pool, Claude teams, or Codex sub-agents)
• Universal orchestration contract - Same swarm behavior across Claude and Codex sessions
• Pre-assigned tasks - Mayor assigns tasks before spawning; workers never race-claim
• Fresh worker contexts - New sub-agents/teammates per wave preserve Ralph isolation
• Wave execution - Only unblocked tasks spawn
• Mayor orchestrates - You control the flow, workers write results to disk
• Thin results - Workers write .agents/swarm/results/<id>.json, orchestrator reads files (NOT Task returns or SendMessage content)
• Retry via message/input - Use send_input (Codex) or SendMessage (Claude) for coordination only
• Atomic execution - Each worker works until task done
• Graceful degradation - If multi-agent unavailable, work executes sequentially in current session

Worker report contract + lane authority (cp-hhd7, cards 4 + 16)

Worker FINAL REPORT — what the orchestrator requires

Workers write raw evidence; the orchestrator does not trust prose summaries. Each .agents/swarm/results/<id>.json or the worker's final message SHOULD include:

files_changed: [list of exact paths]
commit_sha: <git rev-parse HEAD>   # or "no commit" + reason
test_tail: <verbatim last N lines of test output>
conflicts_surfaced: [list, or "none"]

A result missing commit_sha or test_tail is treated as unverified until the orchestrator independently confirms persistence and test passage. The audit cost of trusting summaries exceeds the cost of requiring the fields.

Lane authority (POLICY, card 4 — applies when running a two-lane swarm)

In a multi-lane deployment (this is a contextual policy, not a universal swarm rule), a decision inside one lane's scope is decided by that lane with the other lane's view as input — not a vote, not an escalation. Escalate to the human operator only for:

• genuine out-of-both-lanes decision forks
• gate violations
• a loop that cannot self-heal

Escalating an in-lane sequencing call makes the operator a bottleneck. The lane authority rule is enforced by convention in the control-plane context; the mechanism (swarm) is general.

Workflow Integration

This ties into the full workflow:

/research -> Understand the problem
/plan -> Decompose into beads issues
/crank -> Autonomous epic loop
    +-- /swarm -> Execute each wave in parallel
/validate -> Validate results
/post-mortem -> Extract learnings

Direct use (no beads):

TaskCreate -> Define tasks
/swarm -> Execute in parallel

The knowledge flywheel captures learnings from each agent.

Task Management Commands

# List all tasks
TaskList()

# Mark task complete after notification
TaskUpdate(taskId="1", status="completed")

# Add dependency between tasks
TaskUpdate(taskId="2", addBlockedBy=["1"])

Parameters

When to Use Swarm

Why This Works: Ralph Wiggum Pattern

Follows the Ralph Wiggum Pattern: fresh context per execution unit.

• Wave-scoped worker set = spawn workers -> execute -> cleanup -> repeat (fresh context each wave)
• Mayor IS the loop - Orchestration layer, manages state across waves
• Workers are atomic - One task, one spawn, one result
• TaskList as memory - State persists in task status, not agent context
• Filesystem for EVERYTHING - Code artifacts AND result status written to disk, not passed through context
• Backend messaging for signals only - Short coordination signals (under 100 tokens), never work details

Ralph alignment source: ../shared/references/ralph-loop-contract.md.

Integration with Crank

When /crank invokes /swarm: Crank bridges beads to TaskList, swarm executes with fresh-context agents, crank syncs results back.

---

Codex-Specific Coordination (folded from codex-team)

When the selected backend is Codex (Codex CLI on PATH or Codex sub-agents), swarm follows the same wave model, but Codex agents are headless — they cannot negotiate locks or wait turns. The orchestrator IS the lock manager: all conflict prevention happens before spawning, via file-target analysis.

Backend selection (Codex path), in order:

1. spawn_agent available → Codex experimental sub-agents (preferred)
2. Codex CLI available → Codex CLI via Bash (codex exec ...)
3. skill tool read-only (OpenCode) → OpenCode subagents (task(subagent_type="general", ...))
4. None → fall back to the runtime-native swarm backend / sequential

Pre-flight (CLI backend only): verify which codex, then test the configured default model with codex exec --full-auto -C "$(pwd)" "echo ok". If either fails, fall back to another backend.

Canonical command + flag order:

codex exec --full-auto -C "$(pwd)" -o <output-file> "<prompt>"

Flag order: --full-auto → -C → -o → prompt (insert -m "<model>" before -C only when intentionally pinning a model; otherwise the user's default is used). Valid flags: --full-auto, -m, -C, -o, --json, --output-schema, --add-dir, -s. Do NOT use -q / --quiet (don't exist).

• Cross-project tasks: --add-dir /path/to/other/repo (repeatable) grants access beyond -C.
• Progress monitoring: add --json to stream JSONL events (turn.started / turn.completed with token usage). No events for 60s → agent likely stuck.
• Sandbox levels (-s): read-only for judges/reviewers, workspace-write (default with --full-auto), danger-full-access only in externally-sandboxed environments. Prefer -s read-only for review/analysis tasks.

File-target strategy (apply before spawning Codex agents):

For multi-wave Codex runs, the lead reads prior-wave results, then injects a summary of what changed (not raw diffs) into the next wave's prompts. Limits: ≤6 agents/wave, 120s default timeout, ≤3 waves (reconsider decomposition beyond that). Output dir: .agents/codex-team/ (or the standard .agents/swarm/results/). Concrete tool calls: references/backend-codex-subagents.md.

Codex troubleshooting: codex not found → npm i -g @openai/codex or fall back; default model unavailable → verify the echo ok pre-flight or pin with -m; empty/missing output → ensure the -o directory exists and is writable.

---

OL Wave Integration

Read references/ol-wave-integration.md when you invoke /swarm --from-wave <json-file> — covers pre-flight ol CLI check, input JSON format, task creation from wave entries, completion backflow via ol hero ratchet, and example flow.

---

References

• Executable acceptance: references/swarm.feature — wave-validity gate, fresh-context workers, conflict-free ownership, results+cleanup (soc-qk4b)
• Local Mode Details: skills/swarm/references/local-mode.md
• Validation Contract: skills/swarm/references/validation-contract.md

---

Examples

Building a User Auth System

User says: /swarm

What happens:

1. Agent identifies unblocked tasks from TaskList (e.g., "Create User model")
2. Agent selects spawn backend using runtime-native priority (Claude session -> Claude teams; Codex session -> Codex sub-agents)
3. Agent spawns worker for task #1, assigns ownership via TaskUpdate
4. Worker completes, team lead validates changes
5. Agent identifies next wave (tasks #2 and #3 now unblocked)
6. Agent spawns two workers in parallel for Wave 2

Result: Multi-wave execution with fresh-context workers per wave, zero race conditions.

Direct Swarm Without Beads

User says: Create three tasks for API refactor, then /swarm

What happens:

1. User creates TaskList tasks with TaskCreate
2. Agent calls /swarm without beads integration
3. Agent identifies parallel tasks (no dependencies)
4. Agent spawns all three workers simultaneously
5. Workers execute atomically, report to team lead via SendMessage or task completion
6. Team lead validates all changes, commits once per wave

Result: Parallel execution of independent tasks using TaskList only.

---

Worktree Isolation (Multi-Epic Dispatch)

Read references/shared-checkout-discipline.md first when the target checkout (~/dev/<repo>) is shared with peer agents — it documents when worktrees are mandatory (vs. optional) and the three failure modes (branch-deletion data loss, swarm attribution confounded, destructive-recovery temptation) that motivate the discipline.

Read references/worktree-isolation.md when you need to dispatch workers across multiple epics or run waves with overlapping files — covers isolation semantics per backend, effort levels, post-spawn verification, manual worktree creation/routing/merge-back, the Merge Arbiter Protocol, cleanup, and the --worktrees / --no-worktrees parameters.

Worktree reaping (teardown). After a worker's PR is confirmed MERGED (gh pr view --json state = MERGED), reap its tree: git worktree remove <path> --force then git worktree prune. Leave unmerged-PR worktrees intact. Target zero orphaned worktrees — bound the live count to in-flight PRs. (The committed disposition gate scans the tracked file set, not live on-disk worktrees, so this teardown is the operational backstop.)

---

Troubleshooting

Read references/troubleshooting.md for full diagnostics.

Related skills

• /using-atm — out-of-session ATM substrate when a swarm needs persistent panes and human attach/steer.

Reference Documents

• references/shared-checkout-discipline.md
• references/agent-genie-coordination-contract.md — Eight-field contract each parallel stream declares before claiming work- references/conflict-recovery.md
• references/cold-start-contexts.md
• references/backend-background-tasks.md
• references/backend-claude-teams.md
• references/backend-codex-subagents.md
• references/backend-inline.md
• references/claude-code-latest-features.md
• references/execution-steps.md
• references/local-mode.md
• references/ol-wave-integration.md
• references/ralph-loop-contract.md
• references/troubleshooting.md
• references/validation-contract.md
• references/worker-pitfalls.md
• references/worker-specs.md
• references/worktree-isolation.md
• ../shared/references/backend-background-tasks.md
• ../shared/references/backend-claude-teams.md
• ../shared/references/backend-codex-subagents.md
• ../shared/references/backend-inline.md
• ../shared/references/claude-code-latest-features.md
• references/pre-spawn-friction-gates.md
• references/scope-escape-template.md
• references/worker-pre-task-checks.md
• ../shared/references/ralph-loop-contract.md